The DarkSide collaboration operated the DarkSide-50 detector, a dual-phase argon Time Projection Chamber (TPC), developed for use in a search for direct evidence of dark matter from 2013 to 2020. The experiment was hosted in Hall C of the Laboratori Nazionali del Gran Sasso, underneath the Gran Sasso e Monti della Laga National Park, and published world leading constraints on both dark-matter nucleon and electron cross-sections.

The Global Argon Dark Matter Collaboration (GADMC) was formed to unite the global community interested in dark-matter searches using liquid argon (LAr) target. GADMC is currently building inside the LNGS Hall-C DarkSide-20k, a two-phase LAr detector with a 50 tonnes active volume, 1000 times more than its predecessor DarkSide-50. The experiment is expected to begin operation in 2027 and is designed to either detect WIMP dark matter or reach a 90% CL exclusion sensitivity to WIMP-nucleon cross sections of 6.3x10-48 cm2 at the mass of 1TeV/c2.

DarkSide-50 experiment and dual-phase TPC technique


Dual-phase time projection chambers using noble liquids are detectors able to measure both the scintillation light induced by particle interacting in the active noble liquid target and also the ionization charges produced in the event. The detector is equipped with light detectors able to detect the prompt scintillation light. The ionization electrons, guided by an electric field, drift towards the surface of the liquid where a thin layer of gas is present. A stronger electric field is created on the surface of the liquid, enabling the extraction and subsequent acceleration of these ionization electrons in the gas that in turn generate a delayed light signal used to reconstruct the 3-dimensional position of the event.

grafico darkside

DarkSide-50 is a dual-phase argon TPC. Thirty-eight 3" Hamamatsu low-background R11065 PMTs (photomultiplier tubes), 19 each on the top and the bottom, view the active region through fused silica windows. The windows are coated on both sides with Indium Tin Oxide, ITO, a transparent conductor. This allows the inner window surfaces to serve as the grounded anode (top) and -60 KV cathode (bottom) of the TPC while maintaining their outer surfaces near the -1.5 KV PMT photocathode potential.
A gas layer for production of the electroluminescence signature is provided by a cylindrical rim on the fused silica anode window, which extends downward to form a “diving bell” containing the 2 cm-thick argon vapor layer (“gas pocket”) above the TPC drift volume. The cylindrical vessel containing the active region is made of PTFE, treated to be highly reflective at visible wavelengths. The entire inner surface of the active volume is coated with the wavelength shifter TetraPhenylButadiene (TPB) to convert the 128 nm argon scintillation into the wavelength range detectable by the PMTs. The drift field is produced by a system consisting of the ITO cathode and anode planes, a field cage, and a grid that separates the drift and electron extraction regions.

The DarkSide-50 TPC was deployed within a borated liquid scintillator-based neutron veto, which is in turn inside a water Cherenkov muon veto, allowing a very effective active background suppression. In 2015 the DarkSide collaboration pioneered the use of ultra low-radioactivity Argon from Underground sources (UAr) as the ideal target for future experiments. The physics run using the UAr target lasted from 2015 to 2018. Using this data the DarkSide-50 collaboration published its final search on high mass WIMP dark matter candidates in 2018, with a 90% CL exclusion limit of 3.78x10-44 cm2 at the mass of 1TeV/c2. More recently, in 2022, it updated its earlier results on low mass dark matter candidates using the full data set acquired by the experiment, setting a world best 90% CL exclusion for DM-nucleon cross section of 6x10-43 cm2 for a WIMP mass of 3 GeV/c2.

DarkSide-20k experiment



The DarkSide-20k experiment consists of an inner detector housed within a sealed stainless steel vessel and an outer muon veto all deployed within a ProtoDUNE-style membrane cryostat. It is currently under construction in the LNGS Hall-C and is foreseen to begin operations in 2027 and will either detect WIMP dark matter or exclude a large fraction of favored WIMP parameter space.



The inner detector is a dual-phase argon time projection chamber contained within a stainless steel vessel filled with ultra low-radioactivity Argon from Underground sources (UAr) and readout by 528 SiPM-based PhotoDetector Modules (PDU), assembled in Nuova Officina Assergi (NOA) at LNGS. The TPC is surrounded by a Gd-loaded PMMA shell acting as a neutron moderator with enhanced capture probability, used to suppress neutron induced events mimicking dark matter signals in the TPC. Gamma rays from neutron captures are detected by scintillation signals in liquid argon either in the LAr TPC active volume or in the buffer of UAr surrounding the TPC. This second UAr buffer is readout by additional 120 PDUs (vPDU) deployed on the external surfaces of the TPC. The height of the TPC is 350 cm and the total mass of UAr in the active volume is 49.7 t.

The UAr volume is separated by the sealed stainless steel vessel from the 600 t of liquid Argon from the Atmosphere (AAr) filling the entire ProtoDUNE cryostat volume. The outer veto detector consists of 32 PDUs suspended in the AAr buffer and is used to suppress cosmic muon induced backgrounds.
DarkSide-20k is designed to operate with zero backgrounds, meaning that all sources of instrumental background are reduced to <0.1 events over a 200 t yr exposure. All background from minimum-ionizing radiation sources will be completely removed thanks to the combined action of the Pulse Shape Discrimination (PSD) of the primary scintillation and comparison of the primary and secondary scintillation. This outstanding sensitivity to coherent nuclear recoils will enable DarkSide-20k to detect a supernova neutrino burst coming from anywhere in the Milky Way Galaxy and, for a majority of the galaxy, clearly identify the neutronization burst, thus performing a flavor-blind measurement of the total neutrino flux and average energy.

Selected recent publications


This email address is being protected from spambots. You need JavaScript enabled to view it. (GSSI & Princeton University)
Deputy spokesperson 
This email address is being protected from spambots. You need JavaScript enabled to view it. (Royal Holloway University of London)


Official website